OptiPure BWS175 Reverse Osmosis RO Treatment System

The OptiPure® BWS175 utilizes Reverse Osmosis (RO to remove >97% of the Total Dissolved Solids (TDS) from water. Then, a balance of minerals is dissolved into the RO water, followed by a precision blend valve for further TDS adjustment, to provide optimized water with desirable TDS for recommended applications.

RO is needed in areas with high total dissolved solids (TDS) in the source water. These areas are primarily located in western and southwestern states where the water source comes from aquifers vs. groundwater (i.e. lakes and rivers).

• Reduces total dissolved solids (TDS) in your water by more than 97%
  
• Produces up to 175 gallons of water per day operating at line-pressure
• Adjustable precision blend valve for further TDS modification
• Integrated monitor that shows optimized water TDS at any time
• Compact design that allows for wall or under-the-counter mounting
• Includes an integrated pre-filter which reduces sediment and chlorine
• Available with a 2.5, 5, 10, or 16-gallon storage tank
• For full system protection, please add FX-12 Prefilter and QTPTCR10-1 Post Polishing Filter

General Specifications:

• Processor Dimensions: 16.3"H × 12.9"W × 7"D
• Connection: 3/8" Push Fit Tubing
• Operating Pressure Range: 60-80 psi at 0.5 GPM (3.5-5.9 bar)
• Inlet Water Temp Range: 40*-100*F
• Drain Connection: 2.0 GPM Minimum Flow
• TDS Rejection: <97%
• Daily Water Production: 175 gals/day, 7.3 gals/hr
• BWS175 Simple Install Guide
• Informational Brochure

OptiPure 2.5 Gal. BWS175/2 Specifications:

• Tank Capacity: 2.5 Gallons
• Tank Dimensions: 15.4"H × 11"D
• Part No. BWS175/2 164-01602
• OptiPure® BWS175/2 Spec Sheet

OptiPure 5 Gal. BWS175/5 Specifications:

• Tank Capacity: 5 Gallons
• Tank Dimensions: 20.3" H × 12.3"D
• Part No. BWS175/5 164-01605
• OptiPure® BWS175/5 Spec Sheet

OptiPure 10 Gal. BWS175/10 Specifications:

• Tank Capacity: 10 Gallons
• Tank Dimensions: 23.3" H × 15.6"D
• Part No. BWS175/10 164-01610
• OptiPure® BWS175/10 Spec Sheet

OptiPure 16 Gal. BWS175/16 Specifications:

• Tank Capacity: 16 Gallons
• Tank Dimensions: 30.4"H × 15.6"D
• Part No. BWS175/16 164-01616
• OptiPure® BWS175/16 Spec Sheet

Replacement Filters:

• CTO-Q10 Pre-Filter 300-05828
• AMS-QT15 Membrane 204-52820
• ILMA-10.14 Mineral Addition 252-70255

Optipure Reverse Osmosis Systems:

• BWS Blending Water Systems allow management of TDS with the use of a precision blend valve to adjust TDS to the desired level.
• OP Mineral Addition Systems utilize mineral addition to ensure a specific balance of minerals in water regardless of incoming water quality.

Storage Tank: Producing water utilizing reverse osmosis is a slow process that does not make water fast enough to meet the needs of the equipment. The storage tank is a clean environment where the optimized water is stored until called for. It includes a 0.2-micron absolute air filter to protect the optimized water against airborne contaminants and a low water level cut-out switch to protect the pump.

Please note, this item is not available for expedited shipping at this time.

WARRANTY: This item is subject to a 90-day parts warranty. All warranty claims are subject to manufacturer discretion.

PLEASE NOTE: OptiPure is now part of the Pentair family of brands. Many well-known Optipure filter systems have been discontinued and/or rebranded under the Pentair Everpure brand. The quality and specifications for all Pentair Everpure filter systems remain extremely high. This change means many OptiPure part numbers will be rebranded as Pentair Everpure. Please reach out to us with any questions - we're here to help!